Ultra-Sanitary, Gap-Free Screener
Ultra-Sanitary, Gap-Free Screener
- "Air-Lift" Quick Screen Change System
- "Clamshell Lid" Quick Screen Change System
- Clean-In-Place (CIP) Design
- Pharmaceutical Specifications
- Ball Tray Anti-Blinding Device
- Kleen Screen Anti-Blinding Device
- Ultrasonic Anti-Blinding Device for fine powders
- Auto-Lube Automatic Lubrication System for gyratory motors
- sanitary standards
- Four-Finger Flex Wiper Anti-Blinding Device
- High Capacity "Kascade" Internal Recycle Screening Decks
Need help? Contact Us Here
This VIBROSCREE® Ultra-Sanitary Screener meets cGMP, 3-A, USDA, and FDA standards. It features gap-free screen frames, quick-release "U" clamps, radius corners, a domed lid, an Air-Lift device to raise the frames, continuous ground and polished welds, a gap-free and crevice-free interior finished to sanitary standards, and a washable underside.
The external, interlocking flange configuration of the screen frame fully envelops the support ring of the screen, allowing the screen's wire mesh to extend to the interior walls of the frame. The design eliminates the gap between the screen ring and frame wall of conventional screeners, eliminating areas where material would otherwise collect.
The screener dramatically reduces the possibility of contamination due to bacteria growth, while improving sanitizing efficiency, making it suitable for pharmaceutical, food and dairy applications as well as chemical applications where cross-contamination is a concern.
Screens are mounted to support rings using FDA approved epoxy and sealed using FDA approved gasket material, and can be provided with a mesh-tolerance certificate. The wire mesh screening material is offered in 304, 316 and "magnetic" 400-series stainless steel that, if broken, can be captured by a downstream magnet.
Adding to the unit's cleanliness are a domed lid, discharge spouts with radius corners, continuous weld seams and material contact surfaces polished to a sanitary finish, and a 4-post, open base with stainless steel motor enclosure allowing thorough wash down of the unit's underside and plant floor.
The screener can be equipped with a Clean-In-Place (CIP) spray wash system, and designed to operate under a nitrogen purge.
The explosion-proof, imbalanced-weight gyratory motor is equipped with Kason's "E-Z slide, quick-force" tool-free, weight adjustment system, and is fitted with an optional "Auto Lube" automatic lubrication system said to minimize bearing failure by introducing fresh lubricant onto the bearing race while flushing it of wear materials, broken-down lubricant, and contaminants.
The screener is also equipped with Kason's "Air-Lift" system, allowing rapid access to the interior of the unit for cleaning, inspection, and/or screen changes. Six lockable U-shaped quick-disconnect vertical clamps allow disengagement of screen frame sections significantly faster than with conventional band clamps, after which the upper frame can be raised pneumatically and locked in place, reducing downtime and allowing one operator to perform what was previously a two-person task, depending on screen diameter.
The controls are housed in a lockable panel and can interface with existing PLCs for remote control.
Contact a Specialist TodayContact Kason
Ask Us a Question
Contact us with any inquiries and we will make sure to contact you soon