|
This "RC" Vibroscreen® "Two-Stage" circular vibratory screener reportedly offers 60 to 80 percent higher capacities than conventional screeners of the same diameter.
The two-stage design features an upper screen deck having a 360° annular gap at the screen's periphery. This deck is fed with more material than it can efficiently screen, with two results: 1) On-size material falling through the upper screen is funneled through a hole in the center of the lower screen to the machine's discharge outlet and 2) The overflow of on-size material plus all oversize material cascade over the screen's periphery, onto a second screen of equal mesh that scalps the balance of material in normal fashion.
The two-stage machine boosts capacity without increasing floor space, and
|
costs 20 to 30 percent less than conventional screeners having larger diameters and equivalent capacities.
The two-stage screening hardware can be installed in new circular vibratory separators or retrofitted on site in existing circular screeners. Two-stage machines are offered in diameters from 40 to 100 inches to scalp up to 70 tons of free-flowing bulk material per hour. Available to 3A, USDA, FDA, BISSC and other sanitary standards, the units can be disassembled rapidly for thorough wash-down.
A range of accessories is available including clean-in-place spray heads, anti-blinding devices, quick-release clamshell lids for rapid screen changes, and an automatic long-term lubrication system for gyratory motor bearings. |
Options:
|
;)